INSTALLATIONS BY DC, LLC
SECTION 12493 [12 24 00]
S-D2 DUAL ROLLER MANUAL WINDOW SHADES
PART 1 GENERAL
1.1SECTION INCLUDES
1.A.Manually operated, roll-up fabric interior window shades including mounting and operating hardware.
1.2RELATED SECTIONS
2.A.Section 06100 [06 10 00] – Rough Carpentry: Blocking for support of window shade hardware.
2.B.Section 07900 [07 90 00] – Joint Sealers: Sealants for perimeter of shade system.
2.C.Section 09260 [09 21 23] – Gypsum Board Assemblies: Suspended gypsum board ceilings to contain recessed window shade pockets.
2.D.Section 09510 [09 51 23] – Acoustical Tile Ceilings: Suspended acoustical panel ceilings to contain recessed window shade pockets.
1.3REFERENCES
3.A.NFPA 701-99 – Fire Tests for Flame-Resistant Textiles and Films.
3.B.GREENGUARD Environmental Institute Gold.
3.C.US Green Building Council.
3.D.ANSI/WCMA A100.1-2018
1.4SUBMITTALS
4.A.Submit under provisions of Section 01330 [01 33 26] – Submittal Procedures:
4.B.Product Data: Manufacturer’s data sheets on each product specified, including:
4.B.1.Preparation instructions and recommendations.
4.B.2.Installation and maintenance instructions.
4.B.3.Styles, material descriptions, dimensions of individual components, profiles, features, finishes and operating instructions.
4.B.4.Storage and handling requirements and recommendations.
4.B.5.Mounting details and installation methods.
4.C.Shop Drawings: Plans, elevations, sections, product details, installation details, operational clearances, wiring diagrams and relationship to adjacent work.
4.D.LEED Submittals: Provide documentation of how the requirements of Credit will be met.
4.E.Window Treatment Schedule: For all roller shades. Use same room designations as indicated on the Drawings, field verified window dimensions, quantities, type of shade, controls, fabric, and color, and include opening sizes and key to typical mounting details.
4.F.Selection Samples: For each finish product specified, two complete sets of shade cloth options and aluminum finish color samples representing manufacturer’s full range of available colors and patterns.
4.G.Verification Samples: For each finish product specified, two complete sets of shade components, unassembled, demonstrating compliance with specified requirements. Shade fabric sample and aluminum finish sample as selected, representing actual product, color, and patterns. Mark face of material to indicate interior faces.
4.H.Maintenance Data: Methods for maintaining roller shades, precautions regarding cleaning materials and methods, instructions for operating hardware and controls.
4.I.Manufacturer’s Certificates: Certify products meet or exceed specified requirements.
1.5QUALITY ASSURANCE
5.A.Manufacturer Qualifications: Obtain roller shades through one source from a single manufacturer with a minimum of twenty years’ experience in manufacturing products comparable to those specified in this section.
5.B.NFPA Flame-Test: Passes NFPA 701. Materials tested shall be identical to products proposed for use.
5.C.Mock-Up: Provide a mock-up of one of each type roller shade assembly specified for evaluation of mounting, appearance and accessories.
5.C.1.Locate mock-up in window(s) designated by Architect.
5.C.2.Do not proceed with remaining work until mock-up is accepted by Architect.
1.6DELIVERY, STORAGE, AND HANDLING
6.A.Do not deliver window shades until building is enclosed and construction within spaces where shades will be installed is substantially complete.
6.B.Deliver products in manufacturer’s original, unopened, undamaged containers with labels intact.
6.C.Label containers and shades according to Window Shade Schedule.
6.D.Store products in manufacturer’s unopened packaging until ready for installation.
1.7SEQUENCING
7.A.Ensure that locating templates and other information required for installation of products of this section are furnished to affected trades in time to prevent interruption of construction progress.
7.B.Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.
1.8PROJECT CONDITIONS
8.A.Install roller shades after finish work and ambient temperature, humidity and ventilation conditions are maintained at levels recommended for project upon completion.
1.9WARRANTY
9.A.Hardware: standard five-year limited warranty.
PART 2 PRODUCTS
2.1MANUFACTURERS
1.A.Acceptable Manufacturer: Installations by DC, LLC. 5101 Chase Avenue, Downers Grove, IL 60515. Office Phone 630-323-2581, dcinstallations.com
1.B.Substitutions: Not permitted.
1.C.Requests for substitutions will be considered in accordance with provisions of Section 01600.
2.2MANUALLY OPERATED DUAL ROLLER WINDOW SHADES
2.A.Manually Operated Window Shades with Independent Control: Manually operated, vertical roll-up, fabric window shade with components necessary for complete installation; Clutch-operated Dual Roller as manufactured by Installations by DC, LLC..
2.A.1.Operation: Bead chain and clutch operating mechanism allowing shade to stop when chain is released. Designed never to need adjustment or lubrication. Provide limit stops to prevent shade from being raised or lowered too far.
2.A.1.a.Clutch mechanism: Fabricated from high carbon steel and molded fiberglass reinforced polyester or injected molded nylon. Minimum 20 lb. lifting capacity. White or Black color as selected by Architect.
2.A.1.b.Bead chain loop: Stainless steel bead chain hanging at side of window.
2.A.1.c.Bead chain loop: Plastic bead chain hanging at side of window, Ivory, Grey, White, Bronze or Black color as selected by Architect.
2.A.1.d.Idler Assembly: Provide roller idler assembly of molded nylon with adjustable or spring-loaded length idler pin to facilitate easy installation, and removal of shade for service.
2.A.1.e.Bead Chain Hold Down: P-Clip (standard).
2.A.1.f.Bead Chain Hold Down: Spring-Loaded Tensioner complies with ANSI/WCMA A100.1-2018 safety standard.
2.A.2.Dual Roller Configuration / Mounting:
2.A.2.a.Dual roller endcaps only. Endcaps for surface or recessed mounting of dual roller window shades. 1028 steel stamping.
2.A.2.b.Dual roller fascia. Endcaps with fascia designed for surface mounting of dual roller window shades.
2.A.2.b.1)Endcaps: 1028 steel stamping.
2.A.2.b.2)Fascia: L-shaped cover of extruded aluminum, .060 wall. Assembly snaps onto endcaps without exposed fasteners.
2.A.2.b.3)Size: 4-3/4 inches deep by 7 inches high x length required by window opening.
2.A.2.b.4)Finish: Clear anodized.
2.A.2.b.5)Finish: Black powder coat.
2.A.2.b.6)Finish: White powder coat.
2.A.2.b.7)Finish: Ivory powder coat.
2.A.2.b.8)Finish: Bronze powder coat.
2.A.2.b.9)Finish: Custom powder coat as selected by the Architect.
2.A.2.b.10)As selected by architect from manufacturer’s standard colors.
2.A.2.c.Dual roller with ceiling/wall headbox. Fascia, L-shaped top/back, and endcaps designed for wall or ceiling installation of dual roller window shades.
2.A.2.c.1)Endcaps: 1028 steel stamping.
2.A.2.c.2)Fascia: L-shaped cover of bent steel. Assembly snaps onto endcaps without exposed fasteners.
2.A.2.c.3)Size: 4-3/4 inches deep x 7 inches high x length required by window opening.
2.A.2.c.4)Finish: Clear Anodized
2.A.2.c.5)Finish: Black powder coat
2.A.2.c.6)Finish: White powder coat
2.A.2.c.7)Finish: Ivory powder coat
2.A.2.c.8)Finish: Bronze powder coat
2.A.2.c.9)Finish: Custom powder coat as selected by the Architect.
2.A.2.c.10)As selected by architect from manufacturer’s standard colors.
2.A.2.d.Dual roller with pocket headbox. Pocket and endcaps designed for recessed ceiling installation of dual roller window shades.
2.A.2.d.1)Material: 18-gauge steel.
2.A.2.d.2)Finish: White Inside/Grey Outside with white ceiling tile flange.
2.A.2.d.3)Finish: Grey Inside/White Outside with white ceiling tile flange.
2.A.2.d.4)Size: 5-3/4 inches (146 mm) wide by 7-3/4 inches (197 mm) high.
2.A.2.d.5)Closure Panel Aluminum, without exposed fasteners:
2.A.2.d.6)Front Tile Flange.
2.A.2.d.7)Left Tile Flange.
2.A.2.d.8)Right Tile Flange.
2.A.2.d.9)Pre-drilled Mounting Holes.
2.A.2.d.10)Pre-drilled Ventilation holes.
2.A.3.Roller Tube: Fabricated from extruded aluminum, galvanized steel, or enameled steel. Diameter, wall thickness, and material selected by manufacturer to accommodate shade type and size. Minimum roller diameter 1.5 inches. Fabric connected to the roller tube with LSE (low surface energy) double sided adhesive specifically developed to attach coated textiles to metal. Adhesive attachment to eliminate horizontal impressions in fabric.
2.A.4.Shade slat:
2.A.4.a.Closed pocket elliptical slat: 1 inch (25 mm) aluminum elliptical slat inside of a 1-5/8-inch (41 mm) pocket with heat sealed ends.
2.A.4.b.Open pocket elliptical slat: 1 inch (25mm) aluminum elliptical slat with plastic ends inside of a 1-5/8-inch (41 mm) pocket.
2.A.4.c.Large flat exposed hem bar: 1-1/2 inch by 5/16-inch (38 mm by 8 mm) rectangular aluminum hem bar with plastic end caps.
2.A.4.d.Small flat exposed hem bar: 7/8 inch by 5/16-inch (22 mm by 8 mm) rectangular aluminum hem bar with plastic end caps.
2.A.4.e.Round exposed hem bar: Small 5/8-inch (16 mm) and Large 13/16-inch (21 mm) aluminum with plastic end caps.
2.A.5.Light Gap Reduction Channels.
2.A.5.a.Aluminum L Angle – 3/4 inch (19 mm) by 1 inch (25 mm).
2.A.5.b.Aluminum L Angle -1 inch (25 mm) by 2-3/4 inches (70mm).
2.A.5.c.Vinyl L Angle-1-1/2 inches (38 mm) by 3/4 inch (19 mm).
2.A.5.d.U Channel -1 inch (25 mm) by 2-1/2 inches (64 mm).
2.A.5.e.H Channel – 1 inch (25 mm) by 5 inches (127 mm).
2.B.Heavy-Duty Manually Operated Window Shades with Independent Control: Manually operated, vertical roll-up, fabric window shade with components necessary for complete installation; Clutch-Operated Dual Roller as manufactured by Installations by DC, LLC
2.C..
2.C.1.Operation: Bead chain and clutch operating mechanism allowing shade to stop when chain is released. Designed never to need adjustment or lubrication. Provide limit stops to prevent shade from being raised or lowered too far.
2.C.1.a.Clutch mechanism: Molded components from proprietary POM thermoplastic, 118” (3mm) steel baseplate and .354 inch (9 mm) primary carbon steel post are joined via a high tonnage hydraulic swaging process; assembled with a rotational roller bearing, overrunning design, and positive mechanical engagement of drive mechanism to tube. White or Black color as selected by Architect. Center bead chain placement for right- or left-hand operation and accommodates side channel with no adjustment of chain location.
2.C.1.b.Bead chain loop: Stainless steel bead chain.
2.C.1.c.Bead chain loop: Polyester bead chain, Ivory, Grey, White, Bronze or Black color as selected by Architect.
2.C.1.d.Bead Chain Hold Down: P-Clip.
2.C.1.e.Bead Chain Hold Down: Spring-Loaded Tensioner complying with ANSI/WCMA A100.1-2018 safety standard.
2.C.2.Dual Roller Configuration / Mounting:
2.C.2.a.Dual roller endcaps only. Endcaps for surface or recessed mounting of dual roller window shades. 1028 steel stamping.
2.C.2.b.Dual roller fascia. Endcaps with fascia designed for surface mounting of dual roller window shades.
2.C.2.b.1)Endcaps: 1028 steel stamping.
2.C.2.b.2)Fascia: L-shaped cover of extruded aluminum, .060 wall. Assembly snaps onto endcaps without exposed fasteners.
2.C.2.b.3)Size: 4-3/4 inches deep x 7 inches high x length required by window opening.
2.C.2.b.4)Finish: Clear anodized.
2.C.2.b.5)Finish: Black powder coat.
2.C.2.b.6)Finish: White powder coat.
2.C.2.b.7)Finish: Ivory powder coat.
2.C.2.b.8)Finish: Bronze powder coat.
2.C.2.b.9)Finish: Custom powder coat as selected by the Architect.
2.C.2.b.10)As selected by architect from manufacturer’s standard colors.
2.C.2.c.Dual roller with ceiling/wall headbox. Fascia, L-shaped top/back, and endcaps designed for wall or ceiling installation of dual roller window shades.
2.C.2.c.1)Endcaps: 1028 steel stamping.
2.C.2.c.2)Fascia: L-shaped cover of bent steel. Assembly snaps onto endcaps without exposed fasteners.
2.C.2.c.3)Size: 4-3/4 inches deep x 7 inches high x length required by window opening.
2.C.2.c.4)Finish: Powder coat.
-
-
-
-
-
-
Finish: Clear anodized.
-
-
-
-
-
2.C.2.c.5)Finish: Black powder coat.
2.C.2.c.6)Finish: White powder coat.
2.C.2.c.7)Finish: Ivory powder coat.
2.C.2.c.8)Finish: Bronze powder coat.
2.C.2.c.9)Finish: Custom powder coat as selected by the Architect.
2.C.2.c.10)As selected by architect from manufacturer’s standard colors
2.C.2.d.Dual roller with pocket headbox. Pocket and endcaps designed for recessed ceiling installation of dual roller window shades.
2.C.2.d.1)Material: 18-gauge steel.
2.C.2.d.2)Finish: White Inside/Grey Outside with white ceiling tile flange.
2.C.2.d.3)Finish: Grey Inside/White Outside with white ceiling tile flange.
2.C.2.d.4)Size: 5-3/4 inches (146 mm) wide by 7-3/4 inches (197 mm) high.
2.C.2.d.5)Closure Panel Aluminum, without exposed fasteners:
2.C.2.d.6)Front Tile Flange.
2.C.2.d.7)Left Tile Flange.
2.C.2.d.8)Right Tile Flange.
2.C.2.d.9)Pre-drilled Mounting Holes.
2.C.2.d.10)Pre-drilled Ventilation holes.
2.C.3.Shade slat:
2.C.3.a.Closed pocket elliptical slat: 1 inch (25 mm) aluminum elliptical slat inside of a 1-5/8-inch (41 mm) pocket with heat sealed ends.
2.C.3.b.Open pocket elliptical slat: 1 inch (25mm) aluminum elliptical slat with plastic ends inside of a 1-5/8-inch (41 mm) pocket.
2.C.3.c.Large flat exposed hem bar: 1-1/2 inch by 5/16-inch (38 mm by 8 mm) rectangular aluminum hem bar with plastic end caps.
2.C.3.d.Small flat exposed hem bar: 7/8 inch by 5/16-inch (22 mm by 8 mm) aluminum rectangular hem bar with plastic end caps.
2.C.3.e.Round exposed hem bar: Small 5/8-inch (16 mm) and Large 13/16 inch (21 mm) aluminum with plastic end caps.
2.C.4.Light Gap Reduction Channels.
2.C.4.a.Aluminum L Angle – 3/4 inch (19 mm) by 1 inch (25 mm).
2.C.4.b.Aluminum L Angle -1 inch (25 mm) by 2-3/4 inches (70mm).
2.C.4.c.Vinyl L Angle-1-1/2 inches (38 mm) by 3/4 inch (19 mm).
2.C.4.d.U Channel -1 inch (25 mm) by 2-1/2 inches (64 mm).
2.C.4.e.H Channel – 1 inch (25 mm) by 5 inches (127 mm).
2.D.Manually Operated Window Shades with Independent Control: Manually operated, vertical roll-up, fabric window shade with components necessary for complete installation; Crank-operated FlexShade as manufactured by Draper, Inc.
2.D.1.Operation: Crank and gearbox.
2.D.1.a.Single shade.
2.D.1.b.Multiple shades.
2.D.1.c.Gear box: Die cast aluminum and steel construction. Injection molded nylon and steel crank insert installed in roller to engage gear box.
2.D.1.d.Crank handle.
2.D.1.d.1)Detachable anodized aluminum and chrome plated steel handle.
2.D.1.d.2)Permanently mounted anodized aluminum and chrome plated steel handle.
2.D.1.d.3)Size: 4 feet (122 cm).
2.D.1.d.4)Size: 6 feet (183 cm).
2.D.1.d.5)Size: 10 feet (305 cm).
2.D.1.e.Idler Assembly: Provide roller idler assembly of molded nylon with adjustable length idler pin to facilitate easy installation, and removal of shade for service.
2.D.2.Dual Roller Configuration
2.D.2.a.Mounting.
-
-
-
-
-
-
Dual roller endcaps. Endcaps for surface or recessed mounting of dual roller window shades. 1028 steel stamping.
-
-
-
-
-
2.D.2.a.1)Dual roller fascia. Endcaps with fascia designed for surface mounting of dual roller window shades.
(2.D.2.a.1.a)Endcaps: 1028 steel stamping.
(2.D.2.a.1.b)Fascia: L-shaped cover of extruded aluminum, .060 wall. Assembly snaps onto endcaps without exposed fasteners.
(2.D.2.a.1.c)Size: 4-3/4 inches deep x 7 inches high x length required by window opening.
(2.D.2.a.1.d)Finish: Clear anodized.
(2.D.2.a.1.e)Finish: Black powder coat.
(2.D.2.a.1.f)Finish: White powder coat.
(2.D.2.a.1.g)Finish: Ivory powder coat.
(2.D.2.a.1.h)Finish: Bronze powder coat.
(2.D.2.a.1.i)Finish: Custom powder coat as selected by the Architect.
(2.D.2.a.1.j)As selected by architect from manufacturer’s standard colors
2.D.2.a.2)Dual roller with ceiling/wall headbox. Fascia, L-shaped top/back, and endcaps designed for wall or ceiling installation of dual roller window shades.
(2.D.2.a.2.a)Endcaps: 1028 steel stamping.
(2.D.2.a.2.b)Fascia: L-shaped cover of bent steel. Assembly snaps onto endcaps without exposed fasteners.
(2.D.2.a.2.c)Size: 4-3/4 inches deep x 7 inches high x length required by window opening.
(2.D.2.a.2.d)Finish: Clear anodized.
(2.D.2.a.2.e)Finish: Black powder coat.
(2.D.2.a.2.f)Finish: White powder coat.
(2.D.2.a.2.g)Finish: Ivory powder coat.
(2.D.2.a.2.h)Finish: Bronze powder coat.
(2.D.2.a.2.i)Finish: Custom powder coat as selected by the Architect.
(2.D.2.a.2.j)As selected by architect from manufacturer’s standard colors
2.D.2.a.3)Dual roller with pocket headbox. Pocket and endcaps designed for recessed ceiling installation of dual roller window shades.
(2.D.2.a.3.a)Material: 18-gauge steel.:
(2.D.2.a.3.b)Finish: White Inside/Grey Outside with white ceiling flange.
(2.D.2.a.3.c)Grey Inside/White Outside with white ceiling tile flange.
(2.D.2.a.3.d)Small Size: 5-3/4 inches (146 mm) wide by 7-3/4 inches (197 mm) high.
(2.D.2.a.3.e)Large Size: 6-12 inches (165 mm) wide by 8-1/2 inches (216 mm) high.
(2.D.2.a.3.f)Closure Panel Aluminum, without exposed fasteners:
(2.D.2.a.3.g)Front Tile Flange.
(2.D.2.a.3.h)Left Tile Flange.
(2.D.2.a.3.i)Right Tile Flange.
(2.D.2.a.3.j)Pre-drilled Mounting Holes.
(2.D.2.a.3.k)Pre-drilled Ventilation holes.
2.D.3.Roller Tube: Fabricated from extruded aluminum, galvanized steel, or enameled steel. Diameter, wall thickness, and material selected by manufacturer to accommodate shade type and size. Minimum roller diameter 1.5 inches. Fabric connected to the roller tube with LSE (low surface energy) double sided adhesive specifically developed to attach coated textiles to metal. Adhesive attachment to eliminate horizontal impressions in fabric.
2.D.4.Shade slat:
2.D.4.a.Closed pocket elliptical slat: 1 inch (25 mm) aluminum elliptical slat inside of a 1-5/8-inch (41 mm) pocket with heat sealed ends.
2.D.4.b.Open pocket elliptical slat: 1 inch (25mm) aluminum elliptical slat with plastic ends inside of a 1-5/8-inch (41 mm) pocket.
2.D.4.c.Large flat exposed hem bar: 1-1/2 inch by 5/16-inch (38 mm by 8 mm) aluminum rectangular hem bar with plastic end caps.
2.D.4.d.Small flat exposed hem bar: 7/8 inch by 5/16 inch (22 mm by 8 mm) aluminum rectangular hem bar with plastic end caps.
2.D.4.e.Round exposed hem bar: Small 5/8-inch (16 mm) and Large 13/16-inch (21 mm) aluminum with plastic end caps.
2.D.5.Light Gap Reduction Channels.
2.D.5.a.Aluminum L Angle – 3/4 inch (19 mm) by 1 inch (25 mm).
2.D.5.b.Aluminum L Angle -1 inch (25 mm) by 2-3/4 inches (70mm).
2.D.5.c.Vinyl L Angle-1-1/2 inches (38 mm) by 3/4 inch (19 mm).
2.D.5.d.U Channel -1 inch (25 mm) by 2-1/2 inches (64 mm).
2.D.5.e.H Channel – 1 inch (25 mm) by 5 inches (127 mm).
2.3FABRIC
3.A.Room Darkening Fabrics
3.A.1.SunBloc Series SB9000: Close woven fiberglass base textile with sun-resistant vinyl film bonded to each side, opaque with minimum tensile strength of 190 pounds for warp and 180 pounds for fill. Fire rating: NFPA 701 1006-Test 1, California U.S. Title 19. Environmental Benefits: Certified to GREENGUARD® and GREENGUARD Gold® standards for low chemical emissions into indoor air during product usage. REACH and RoHS compliant – Lead Free. Bacterial and fungal resistance: ASTM E2180, ASTM G21. Washable and stain resistant. Same color both sides. Opaque, .015 inches thick, 12 oz/square yard.
3.A.2.SunBloc Series SB9100: Close woven fiberglass base textile with sun-resistant vinyl film bonded to each side, opaque with minimum tensile strength of 190 pounds for warp and 180 pounds for fill. Fire rating: NFPA 701 1006-Test 1, California U.S. Title 19. Environmental Benefits: Certified to GREENGUARD® and GREENGUARD Gold® standards for low chemical emissions into indoor air during product usage. REACH and RoHS compliant – Lead Free. Bacterial and fungal resistance: ASTM E2180, ASTM G21. Washable and stain resistant. White exterior in all colors. Opaque, .013 inches thick, 12 oz/square yard.
3.A.3.Flocké® by Mermet®: Opaque, PVC-free fiberglass textile with acrylic flocked backing. Antistatic treated. Fire rating: NFPA 701-10 TM#1, California U.S. Title 19, CAN/ULC-S109-03 Small & Large Flame Test. Environmental Benefits: Certified to GREENGUARD® and GREENGUARD Gold® standards for low chemical emissions into indoor air during product usage. RoHS compliant – lead free. Bacterial and fungal resistance: ASTM E2180, ASTM G21. Draper shades made with this fabric are GreenSpec® listed. Opaque, .020 inches thick, 15.93 oz/square yard.
3.A.4.SheerWeave® Series SW7000 Blackout by Phifer®: PVC-free polyester with acrylic foamed backing. Fire rating: California U.S. Title 19 (small scale), BS 5867 Part 2 Type B Performance, IBC Section 803.1.1 (Class A Rating), NFPA 101 (Class A Rating), NFPA 701 TM#1 (small scale), CAN/ULC-S 109 (large and small scale), CAN/CGSB2-4. 162-M80. Bacterial and fungal resistance: ASTM G21, AATCC 174-1998 Part II and III. Environmental certification: Certified to GREENGUARD® and GREENGUARD Gold® standards for low chemical emissions into indoor air during product usage. Safe use: RoHS/Directive 2002/95/EC, US Consumer Product Safety Commission Section 101 and ANSI/WCMA A 100.1-2007 for lead content. Draper shades made with this fabric are GreenSpec® listed. Opaque, .030 inches thick, 13.92 oz/square yard.
3.A.5.SheerWeave® Series SW7100 Blackout by Phifer®: PVC-coated Fiberglass laminated with a 2-ply PVC film. Fire rating: NFPA 701 TM#1 (small scale), NFPA 701 TM#2 (large scale), BS 5867 Part 2 Type B Performance, CAN/ULC-S 109 (large and small scale), NFPA 101 (Class B Rating), IBC Section 803.1.1 (Class B Rating). Bacterial and fungal resistance: ASTM E 2180, ASTM G21, ASTM G22, AATCC30 Part 3, ASTM D 3273, GREENGUARD® Mold and Bacteria Standard ASTM 6329; Style 2000 face includes Microban® antimicrobial additives. Environmental certification: Certified to GREENGUARD and GREENGUARD Gold® standards for low chemical emissions into indoor air during product usage. Safe Use: RoHS/Directive 2002/95/EC, US Consumer Product Safety Commission Section 101, ANSI/WCMA A 100.1-2007 for lead content and REACH (EC 1907/2006) compliant. Opaque, .025 inches thick, 21.6 oz/square yard, opaque.
3.A.6.SheerWeave® Series SW7400 by Phifer®: PVC-free polyester with acrylic foamed backing. Fire rating: California U.S. Title 19 (small scale), CAN/ULC-S 109 (large and small scale), CAN/CGSB 2-4. 162-M80, NFPA 701 TM#1 (small scale), NFPA 701 TM#2 (large scale). Bacterial and Fungal Resistance: ASTM G21-96, AATCC 174-1998 Part II and III. Environmental Certification: Certified to GREENGUARD® and GREENGUARD Gold® standards for low chemical emissions into indoor air during product usage. Safe Use: RoHS/Directive 2002/95/EC, ANSI/WCMA A 100.1-2007 for lead content, US Consumer Product Safety Commission Section 101. UV Protection: Seal of Approval by the Melanoma International Foundation (MIF) for effectiveness in preventing sun damage to the skin or eyes. Opaque, .029 inches thick, 12.53 oz/square yard.
3.A.7.SheerWeave® Series SW7500 by Phifer®: PVC-free polyester with an acrylic coating. Fire rating: California U.S. Title 19 (small scale), NFPA 101 (Class A Rating), NFPA 701 TM#1 (small scale), BS 5867 Part 2 Type B Performance, CAN/ULC-S 109 (large and small scale), IBC Section 803.1.1 (Class A Rating), CAN/CGSB 2-4.162-M80. Bacterial and fungal resistance: ASTM E 2180 and ASTM G21. Environmental certification: Certified to GREENGUARD® and GREENGUARD Gold® standards for low chemical emissions into indoor air during product usage. Safe use: RoHS/Directive 2002/95/EC, US Consumer Product Safety Commission Section 101 and ANSI/WCMA A 100.1-2007 for lead content. Opaque, .016 inches thick, 12.14 oz/square yard.
3.A.8.SheerWeave® Series SW7600 by Phifer®: PVC-free polyester with an acrylic foamed backing. Fire rating: California U.S. Title 19 (small scale), NFPA 701 TM#1 (small scale), BS 5867 Part 2 Type B Performance, CAN/ULC-S 109 (large and small scale). Bacteria and fungal resistance: ASTM G21-96, AATCC 174-1998 Part II and III. Environmental certification: Certified to GREENGUARD® and GREENGUARD Gold® standards for low chemical emissions into indoor air during product usage. Safe use: RoHS/Directive 2002/95/EC, ANSI/WCMA A 100.1-2007 for lead content, US Consumer Product Safety Commission Section 101. UV protection: Seal of approval by the Melanoma International Foundation (MIF) for effectiveness in preventing sun damage to the skin or eyes. Opaque, .020 inches thick, 11.8 oz/square yard.
3.B.Color and pattern: __________, No. _____.
3.C.Color and pattern: As indicated in Color Schedule on Drawings.
3.D.Color and pattern: As selected by Architect from manufacturer’s standard range.
PART 3 EXECUTION
3.1EXAMINATION
1.A.Do not begin installation until substrates have been properly prepared.
1.B.If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
3.2PREPARATION
2.A.Coordinate requirements for blocking and structural supports to ensure adequate means for installation of window shades.
2.B.Coordinate requirements for blocking, construction of shade pockets, and structural supports to ensure adequate means for installation of window shades.
2.C.Coordinate installation of recessed shade pockets with construction of suspended acoustical panel ceilings specified in Section 09510.
2.D.Coordinate installation of recessed shade pockets with construction of suspended gypsum board ceilings specified in Section 09260.
2.E.Coordinate requirements for power supply conduit, and wiring required for window shade motors and controls.
3.3INSTALLATION
3.A.Install in accordance with manufacturer’s instructions.
3.B.Install roller shades level, plumb, square, and true. Allow proper clearances for window operation hardware.
3.C.Install headbox, side channels, and sill channel with sealant specified in Section 07900 – Joint Sealers to eliminate light leaks at perimeter of shade system.
3.D.Position shades level, plumb, and at proper height relative to adjacent construction. Secure with fasteners recommended by manufacturer.
3.4TESTING AND DEMONSTRATION
4.A.1.Crank.
4.A.2.Chain and clutch.
4.B.Demonstrate operation of shades to Owner’s designated representatives.
3.5PROTECTION
5.A.Protect installed products until completion of project.
5.B.Touch-up, repair or replace damaged products before Substantial Completion.
3.6SCHEDULES
6.A.Refer to Drawings for shade types and locations.